News

Whether you’re looking to illuminate your kitchen cupboards or backlight your TV, with LED strip lights, there’s a solution to everything. Favored for their versatility, LED strips to consist of a series of LED emitters installed onto a narrow, flexible circuit board. There’s just one cause for concern. Most LED strips come as long reels between 3ft and 16ft in length. Will they continue to work if they are trimmed down? Yes, LED strip lights will carry on working after they’ve been cut as long as you cut along the designated lines. LED strips are made up of several individual...

LED Strip Lights are such a versatile product due to the fact that they can easily be cut on the given cut lines and connected at any point between the copper dots on the LED Strip Lights, cut lengths vary between products. See the below tutorial for a complete guide on cutting LED Strip Lights and using quick connectors for connection. 1.) Find the Cut Line When cutting LED Strip Light it is very important to cut only on the given cut line between the copper dots. Cutting through or before the copper dots will result in no electrical conductivity...

LED strip lights are designed to be easy to cut apart with a pair of scissors. Each LED has a pair of copper dots at the end. As long as you cut between the dots, all of the LEDs will work. From there, you can connect the LEDs to a power source either through a quick connector or by soldering. If they are connected correctly, all of the LEDs should light up in a colorful display. Part1 Cutting Apart LED Strips 1 Measure out the length of LEDs you need. The LEDs come in 1 long strip. You can cut off...